Table of Contents
Advertisement
»» DS0 Status
»» DS0 Alarms
»» Sig Status
»» Performance: Curr
Prt
CLR
ES
BES
SES
SEFS
LOFC
CSS
UAS
61200266L1-1
Read security:5
Indicates usage on a DS0 basis for each port as follows.
*
Inactive
A
Active call on this DS0
D
Active D channel DS0
M
Maintenance DS0
N
Dedicated DS0
O
Off hook detected
R
Ringing detected
Indicates DS0 alarm as follows:
No alarm DS0
-
D channel alarm (ISDN)
D
Frame alarm (Packet)
F
TBOP alarm (Packet)
T
Read security:5
Indicates signaling of all 24 DS0s. The A/B bits for Rx and Tx DS0s are
shown for each port.
Write security:4; Read security:5
The performance fields – either current, 15 minute total, or 24 hour total –
provide status on key performance measures as specified in ANSI T1.403
and AT&T TR54016 for each of the four T1/PRI ports as follows:
Displays the port number.
Clears information for the selected port. Press Enter when the cursor is over
this field to clear the data.
Errored Seconds. An ES is a second with one or more error events or one or
more Out Of Frame events or one or more Controlled Slips.
Bursty Errored Seconds. A BES is a second with more than one, but less than
320 error events.
Severely Errored Seconds. An SES is a second with 320 or more error events
or one or more Out Of Frame events.
Severely Errored Frame Seconds.
Loss of Frame Count.
Controlled Slip Seconds.
Unavailable Seconds.
PLUS
ATLAS 810
Chapter 7. Modules Terminal Menu
User Manual
7-5
Advertisement
Table of Contents
