Ip Address (Ip Address); Control Port Mode (Cntl Port Mode); Read Community Name (Rd Com Name); Figure 9-1. System Configuration Menu - ADTRAN DSU IQ User Manual

Chapter 9. System Configuration
1 - Change Password
2 - IP Address 0.0.0.0
3 - Control Port Options
4 - Read Community Public
5 - Write Community Private
6 - Trap Mgr Options
7 - Protocol 1
8 - Protocol 2
9 - System Name
10 - System Time
11 - System Date
12 - History Interval Size
Enter Selection --> _

IP Address (IP ADDRESS)

Enter the IP address. The IP address is used when an ethernet
packet is transmitted from the DSU IQ to a foreign subnet. This
option is only available if the ethernet card is installed.

Control Port Mode (CNTL PORT MODE)

Set the control port for Terminal, SLIP Protocol, or PPP Protocol
mode. Set for SLIP or PPP when using the C
SNMP/TELNET path.

Read Community Name (RD COM NAME)

Enter the authentication strings used for SNMP management.
Match the DSU IQ to the SNMP manager for read privileges. If
using front panel entry, see Using the Front Panel on page 9-6 for
more information.
9-2
Configure Unit
None
None
08:01:39
02/24/00
30 Min

Figure 9-1. System Configuration Menu

DSU IQ User Manual
ADTRAN DSU IQ
Local
port for an
ONTROL
61200212L1-1