Section 6.0 Table Connections (Gt1700V) - GE Optima CT680 Series Installation Manual

GE C
OMPANY
D 5472001-1EN, R
IRECTION EVISION

Section 6.0 Table Connections (GT1700V)

Pull and connect the cables as described in
gantry frame. Cut the cable ties to release bundles of cables.
Note: The footswitch connector and wiring harness may be run and secured to the ground bar assembly.
TABLE
J1 table power
J9 table control
Table ground
Table 2-12 Table Cable Connections
Figure 2-26 Table Connections
Note: You need to add the table ground cable and the footswitch adapter plate to ground bar, as shown.
Figure 2-27 Finished Ground Bar Connections
6
FROM CABLE DESCRIPTION
Gantry 120 VAC
Gantry Signal Cable
Gantry Table ground
GND
Chapter 2 - Power, Ground & Interconnect Cables
O CT680 S O
PTIMA ERIES AND PTIMA
Table 2-12. The table cables are bundled with the
J1
CT670 I M
NSTALLATION ANUAL
GTCB
J9
Page 123