GE C
OMPANY
D
5472001-1EN, R
IRECTION
EVISION
8.) Recheck the depth of all holes by inserting an anchor backward into the hole. A ½" (13mm) or
9.) When finished drilling and clearing the anchor holes, vacuum the debris from the inside of each
Redundant Anchor
Location
Redundant
Anchor
Locations
Proper Anchor Position
Alternative Anchor Position
Alternative Anchor Position
Proper Anchor Position
Figure 1-51 Anchor Locations
Page 72
6
less should be showing. Re-drill if needed.
of the holes and from the surrounding (floor) area.
Section 11.0 - Drill the Anchor Holes
O
CT680 S
PTIMA
ERIES AND
See insert
below
Not used
Redundant Anchor
Locations
Primary Anchor
Locations
O
CT670 I
PTIMA
NSTALLATION
Redundant Anchor
Location
Redundant Anchor
Locations
Proper Anchor Position
Alternative Anchor Position
Alternative Anchor Position
Proper Anchor Position
M
ANUAL