GE Optima CT680 Series Installation Manual page 45

GE C
OMPANY
D 5472001-1EN, R
IRECTION EVISION
Figure 1-12 Bubble Level Centering
4.) Adjust the distance between floor and gantry base at Anchor location #1 becomes
approximately 17.0 mm by turning four (4) adjusters equally.
(Be careful no more than 1 turn at a time.)
6
Correct level is 100% of bubble within small circle
Incorrect level is less than 100% of bubble within small circle
Correct - 100%
Chapter 1 - Position Subsystems
O CT680 S O
PTIMA ERIES AND
Bubble
Incorrect < 100%
CT670 I M
PTIMA NSTALLATION ANUAL
Page 45