GE Optima CT680 Series Installation Manual page 64

GE C
OMPANY
D 5472001-1EN, R
IRECTION EVISION
2.) Remove all the transportation packaging and boxes, except dollies, from the table.
3.) Wheel the table to its approximate position relative to the gantry, using the marks made earlier.
Figure 1-39 Moving the Table
4.) Preset leveling pad heights to 20mm, see
Figure 1-40 Setting the Adjusters
Page 64
6
a.) Locate the table leveling pads and position them against the base of the table, using the
adjusters with a 1½" socket and ½" ratchet.
b.) Use the dollies to evenly lower the table until it rests on the leveling pads using an ½"
ratchet.
23mm (0.9 in.)
Section 10.0 - Table Installation (Lite Table)
O CT680 S
PTIMA ERIES AND
Figure 1-40.
Upper Position
Table Base
Adjuster
O CT670 I M
PTIMA NSTALLATION
Table
Casters
Gantry
ANUAL