GE Optima CT680 Series Installation Manual page 176

GE C
OMPANY
D 5472001-1EN, R
IRECTION EVISION
7.) Remove the Mylar (scan) window.
8.) Remove front cover.
Figure A-14 Releasing Cover Brackets
Figure A-15 Rubber Retaining Straps and Cover Locking Mechanism
Page 176
6
a.) Disengage upper cantrell bracket on right side of the cover.
A.) Disengage the locking mechanism on the upper cantrell brackets by using your
thumb to slide the trigger (red lever) back. This will release the locking mechanism
and allow the cantrell to be rotated upwards with steady and firm pressure.
B.) Disengage the rubber retaining straps on right side. See
helpful to lift "up" on the cover to align the stud while attaching the rubber retaining
straps.
Section 1.0 - Gantry Cover Removal
O CT680 S O
PTIMA ERIES AND PTIMA
CT670 I M
NSTALLATION ANUAL
Figure A-15. You may find it