GE Optima CT680 Series Installation Manual page 88

GE C
OMPANY
D 5472001-1EN, R
IRECTION EVISION
Figure 1-70 Footswitch Ground/Bus Bar
9.) Install the footswitch pedal bracket onto the installed ground bus bar.
10.) Torque per
Wire Size AWG
Table 1-7 Ground Buss Bar Torque Values
11.) Install all footswitch covers after work is completed. See Section
Page 88
6
Ground Wire
Ground Bus Connector Plate
Connect the ground wires (not all shown in
Table#2
Gantry#1/0 and #10 and 2-#8 (Optional)
Console#2
PDU#1/0
Table 1-7.
#14 - 8 1.67 ft-lb (2.3 N-m)
#6 - 4 3.0 ft-lb (4.1 N-m)
#3 - 1
#0 - 2/0
Covers, on page 148.
Section 13.0 - Install Table Footswitch Assembly (GT1700V)
O CT680 S
PTIMA ERIES AND
Footswitch
Connectors
Figure 1-70) to the installed ground bus:
Driver Bolt/Hex
6.25 (8.5 N-m)
12.5 (17 N-m)
21 ft-lb (28.5 N-m)
29 ft-lb (39.3 N-m)
O CT670 I
PTIMA NSTALLATION
Ground Wire
Ground Bar
1.8 Install Gantry Base
M
ANUAL