GE Optima CT680 Series Installation Manual page 86

GE C
OMPANY
D 5472001-1EN, R
IRECTION EVISION
4.) Remove the footswitch assembly cover.
5.) Using two (2) M6 bolts, attach the footswitch assembly to the table base.
Figure 1-67 Attach Footswitch
6.) Level the footswitch assembly using the three (3) level adjusters. Two are on the gantry side
Figure 1-68 Level Footswitch
Page 86
6
and one is in the middle. Use a 9 in. level to check the levelness in all directions.
Section 13.0 - Install Table Footswitch Assembly (GT1700V)
O CT680 S O
PTIMA ERIES AND PTIMA
Footswitch support screw
CT670 I M
NSTALLATION ANUAL