GE Optima CT680 Series Installation Manual page 104

GE C
OMPANY
D 5472001-1EN, R
IRECTION EVISION
Figure 2-4 Keyboard with the English film and Warning Label Installed
Verify that none of the buttons get caught and stuck under the overlay. Pay close attention to the
prescribed tilt button on systems with the tilt feature.
Note: X-ray ON sound can be turned off / on using the switch on GSCB bottom if customer does not like
it and if local regulation does not require X-ray ON sound. Detail information refer to Service
Methods->Troubleshooting->Console-> GSCB Troubleshooting.
4.) The keyboard should attach to the GSCB using the supplied Velcro strip and fit snugly against
5.) Route the GSCB cable and connect connectors according to
Page 104
6
- Select keyboard overlay from keyboard collector (5324605-XX) to attach. (See
4)
Filming
Film Film Film Print
Image Screen MID Series
- Select the GSCB overlay (with both Tilt and E-Reset, P/N is 5401237-XXX) install the
proper overlay with the appropriate language for the system.
the GSCB when finished, as shown in
Section 3.0 - Console Connections
O CT680 S
PTIMA ERIES AND
Window / Level
Previous
Abdomen Head Lung
W/L
Figure 2-3.
O CT670 I
PTIMA NSTALLATION
Media- AutoFilm
Spine Vertebra
stinum Image
Figure 2-5 and Table 2-5
M
ANUAL
Figure 2-