GE Optima CT680 Series Installation Manual page 195

GE C
OMPANY
D 5472001-1EN, R
IRECTION EVISION
5.) Install two beams to the left and right legs as shown in
loose.
Figure C-4 Beams Installation
6.) Mount the rear plate on two beams by screwing 6 screws.
Figure C-5 Rear Plate Installation
7.) Tighten all screws.
6
Appendix C - Operating Table Installation and Adjustment
O CT680 S O
PTIMA ERIES AND PTIMA
Figure C-4. Note to keep all screws
Left leg
Pay attention to beams installation
direction, the rear plate should be
mounted close to the left leg
Refer to Figure C-5
CT670 I M
NSTALLATION ANUAL
Page 195