GE Optima CT680 Series Installation Manual page 177

GE C
OMPANY
D 5472001-1EN, R
IRECTION EVISION
b.) Disengage the left side of the front cover.
Figure A-16 Disengage the Left Side of the Front Cover
9.) Rotate front cover away from gantry.
a.) Move front cover away from gantry, leaving space (about 5 feet) between cover and
b.) Pull the locking pin and rotate front cover away from gantry. Place locking pin in one of
pull holding rod
Figure A-17 releasing Front Cover Dolly Hinge
6
A.) Remove the small cover from the front cover.
B.) Loosen M12 screw.
gantry.
the side dolly perforations (see
Locking Pin
Appendix A – Gantry Cover Removal and Dolly Setup
O CT680 S O
PTIMA ERIES AND
Figure A-17).
CT670 I M
PTIMA NSTALLATION ANUAL
Page 177