GE Optima CT680 Series Installation Manual page 181

GE C
OMPANY
D 5472001-1EN, R
IRECTION EVISION
e.) Place the Display in the bracket on the right side of the gantry. (see
Figure A-23 Gantry Display Service Mounting Location
12.) Remove right gantry control assemblies, and place it into its service position.
a.) Loose five (5) screws that fasten the control panel to the cover. See
b.) Set dip switch s19-4 to ON position.
Figure A-24 Dip Switch S19 - 4 Setting
6
one hand on the control panel at all times to prevent it from dropping to the floor.
Appendix A – Gantry Cover Removal and Dolly Setup
O CT680 S O
PTIMA ERIES AND PTIMA
CT670 I M
NSTALLATION ANUAL
Figure A-23)
Figure A-24. Keep
Page 181