O2 Sensor Calibration - Siare Falco 202 User Manual

3.8.3 O Sensor calibration
2
3-40
TEST ABORTED
If the system fails the test, please see chapter Alarms - Trouble Shooting or
contact the nearest Siare Support Centre or any other support centres
authorised by Siare.

At the end of the Expiratory flow sensors calibration the system
come back to the MAIN MENU.

In case of first calibration of ventilator, we suggest to execute this
procedure after having checked the PEEP calibration and after
performing a Turbine characterization.
•
For more information please refer to the SERVICE manual.
CAUTION
For additional informations on the " TEST ON DEMAND " not mentioned in
this chapter, please refer to 3.6.2.
If the calibration ends properly
the system shows the " Test
Completed " message.
The system shows the MAIN
MENÚ after some seconds.
If the calibration fails the system
shows the "Test
message
User manual, DU322210210
Failed "