Table of Contents
Advertisement
Mask
Water trap
filter
Other
accessories
Electrical
connections
Falco 202
Perform daily cleaning of the mask
following the instructions of the
responsible doctors or recommended by
the Manufacturer. Hang up the clean
mask to provide that it is completely dry
before use.
Always clean the mask and the hoses or
use a new mask in case the lung
ventilator must be used with a different
patient.
If the lung ventilator is used with more
than one patient in the clinic, insert an
antibacterial filter between the patient
outlet and the hose.
If reusable: clean, then sterilize in
autoclave or chemically disinfect.
Carefully follow the manufacturer's
instructions.
On the aim to guarantee patient and
operator safety it is necessary to keep the
power supply cable in perfect conditions.
See Manufacturer's
instructions.
Check the presence of
fissures and replace in case of
damages.
Refer to the accompanying
documentation.
Perform daily checking's of
cable condition; any damage,
also a minimum damage,
must be promptly eliminated.
Eventually replacing the whole
cable.
6-7
Advertisement
Table of Contents
