Siare Falco 202 User Manual page 35

Function SET : first selection
The SET function permits to
show/modify the patient type choice
( ADULT, PAEDIATRIC ).
Use the GRAPHIC function to select
and edit the curves, the loops, additional
respiratory parameters position and
which loops and curves should be
showed on the screen (please see 2.6.5
or 4.10).
By enabling this function you can also
see the additional respiratory
parameters (if necessary).
Falco 202
When the ventilator is switched-on, selecting SET function it is possible to
choice the PATIENT TYPE ( ADULT, PAEDIATRIC).
The choice of the patient type set automatically the default functioning
parameters of the lung ventilator (breathing parameters and alarms levels).
NOTE : SET function
The choice of the patient type permits then to show/modify the breathing
physiological parameters (PRP) referred to the current Operative Mode.
SET function : for more informations please refer to cfr 4.
This function is available only when the ventilation is active; please see
4.10.
2-11