Siare Falco 202 User Manual page 79

Falco 202
Check the alarms setup and if necessary change the values set,
based on the test you want to carry out.
• Turn the knob, select the alarm you want to change, press the knob to
activate the value editing function.
• Turn the knob clockwise to increase (anticlockwise to decrease) the
value of the selected alarm.
• Press the knob to confirm the modification of the alarm value.
Exit the ALARMS screen
• Press the ESC soft key; the system will leave the ALARMS screen.
• After about 60 seconds the system automatically returns to STAND-BY
or ventilator operation display.
•
Press and turn the knob: the
system will activate the MENU
function.
•
Press the knob once again;
the system will display the
MAIN MENU screen, SETUP
option.
•
Turn the knob: the system will
activate the ALARMS option.
•
Press the knob: the system
will activate the ALARMS
page.
3-29