•
After completing the " SELF TEST " phase, press ESC
to go to TESTS ON DEMAND.
•
After completing the " SELF TEST " phase, press
START to go to STAND-BY mode.
Falco 202
The " SELF TEST " phase
completed successfully.
Go to TESTS ON DEMAND
by pressing ESC.
Go to STAND-BY operating
mode, by pressing START.
TESTS ON DEMAND
By means of this function it is
possible:
•
calibrate the turbine
•
calibrate the expiratory flow
sensor
•
calibrate the O
Sensor
2
STAND-BY mode
•
After carrying out the SELF
TEST or before turning the
ventilator off, it automatically
switches to this mode.
•
In this mode you can set
and/or edit all ventilator
parameters and alarms limit
relative to the operating mode
that you will use on the patient
that you want to treat.
3-17