Table of Contents
Advertisement
2.5
9" LED display
On the front side of Falco 202 lung ventilator for Intensive Care, Emergency and Transport
(referred to from now on as ventilator) is a 9" LED display that will show all information
necessary for patient ventilation.
The main featured information are: operating mode selection, respiratory parameters setup
and display, visual and acoustic alarm warnings.
Use the control keyboard and the encoder knob on the top of the ventilator to interact
directly with the display: this system is defined as GUI (graphical user interface).
The system defined with the acronym GUI is very easy to use by those who are already
familiarised with lung ventilation: you can find in this paragraph all available functionalities.
2.5.1 Operative functions and graphic setting
Falco 202
You can see in the figure below how the GUI is divided into monitoring
areas, parameters setup areas and alarm display areas.
The basic commands and functions of the ventilator are displayed and can
be selected from the bottom of the screen (GUI), using the encoder knob
(please see 2.5.1).
2-9
Advertisement
Table of Contents
