Operating Modes And Prp Parameters; Operating Mode And Prp Parameters Editing Procedure - Siare Falco 202 User Manual

4.8

Operating modes and PRP parameters

4.8.1 Operating mode and PRP parameters editing procedure

4-14
In the following chapter you will find a description of available physiological
respiratory parameters (referred to from now on as PRP) and the operating
modes selectable on Falco 202 lung ventilator.
WARNING !! Patient injury hazard
Thoroughly read this chapter and the entire user's manual to make sure
you set the PRP correctly and choose the most suitable ventilation mode.
The clinician must choose the operating modes that match the patient's
physiological features and pathologies best.
When the ventilator is turned on, the system restores the operative mode
and the relevant parameter values set before the last shut-down.
Just for our examples we refer to the Operative Modes available with
PATIENT TYPE : ADULT.
The procedure for setting a new operating mode or for editing the PRP
values, implies using the encoder knob and the control keyboard as
described on cfr. 2.4.
To exit SET screen:

press the ESC soft key

wait for the system to return to STAND-BY mode automatically.

Ventilator in STAND-BY mode

Press the encoder knob two
times; the system will
activate the SET function
(changes colour).

The system will display all PRP
relative to the set operating
mode (VC/VAC).
User manual, DU322210210