Disposal Of Mast System; Figure 7-2 Nested - Will Burt NIGHT SCAN LITE Instructions Manual

I N
NSTRUCTIONS FOR IGHT

"Mast System" to refer to the entire Night Scan Lite Mast System (Mast Assembly,
Junction Box, Hand-Held Remote Control, and Junction Box Cable).

"Nested" refers to the position of the mast were the mast sections have not extended
(Figure 7-2). The mast remains retracted. This position is sometimes referred to as
"stowed".

"N·m" standards for Newton Meters, which is a unit of torque equal to the force of one
newton applied perpendicularly to a moment arm which is one meter long

"Payload" to refer to the equipment being raised by the mast to an operational height.
This includes the RCP, Lights, and any additional equipment installed on the RCP.

"P/N" stands for Part Number. These are Will-Burt part numbers for various components
in the Mast System.

"RPM" stands for Revolutions Per Minute.

"Ø" stands for diameter

7.2 Disposal of Mast System

Follow all local, state, federal, and provincial regulations for disposal of the Mast System.
Contact The Will-Burt Company if there are any questions.
7-2
S L & I
CAN ITE NFLEXION

Figure 7-2 Nested

Original Instructions
HD
TP-5554501-B
May 2019