Controls - Will Burt NIGHT SCAN LITE Instructions Manual

3.3 Controls

The following controls are available on your system:
Symbol Name
Emergency
Stop Switch
Start
Stop
Mast Up
Mast Down
AUX 1
AUX 2
Light
Pan Left
Pan Right
Tilt Up
Tilt Down
Note:

All motion buttons are momentary and must be pressed and held to maintain motion.
There is no auto-up and auto-down function.

AUX1, AUX2, Light, Pan Left, Pan Right, Tilt Up, and Tilt Down buttons are only active
when the mast is at the fully extended position.

The home position for the RCP is at the extreme travel limit for panning and tilting. Once
the mast reaches the fully extended height, there is only one direction initially possible
for panning and tilting directions. This is required for the auto-stowing feature on the
RCP.
TP-5554501-B
May 2019
I
NSTRUCTIONS FOR
Provides an emergency stop of the system when pressed. All
mast and RCP motion will stop and the system powers down.
Emergency Stop Switch must be twisted and pulled to enable
the system.
Initiates system power when pressed.
Stops motion and powers down the system when pressed.
Extends the mast.
Retracts the mast. Pressing Mast Down initiates auto-homing
of the RCP before the mast retracts.
Toggles Auxiliary 1 on and off.
Toggles Auxiliary 2 on and off.
Toggles the Lights on and off (or other payload for Inflexion
HD). There is one Light button for each of the two Light banks.
Pans the RCP and Lights to the left.
Pans the RCP and Lights to the right.
Tilts the Lights up.
Tilts the Lights down.
Original Instructions
N S L & I
IGHT CAN ITE
Function
HD
NFLEXION
3-3