Section 4 Transportation; General Transportation - Will Burt NIGHT SCAN LITE Instructions Manual

Section 4
Before transporting the system, the system needs to be secured. The exact procedures for
transportation will vary based on the system configuration. The process described in this
manual represents a possible method of transporting the mast. Depending on the environment
and equipment available, other methods may work better. Use the best and safest method for
your circumstances.
Relocation/Driving Hazard! Do not relocate the system during operation or while the mast is
extended to any height above the nested position or powered up. Do not move vehicle until the
mast has been securely nested and powered down. Power-up and operate the mast only if the
vehicle is stationary and securely parked with the parking brake properly applied. Do not
operate without the vehicle interlock safety circuit installed. Relocating the system during
operation or after mast is extended could result in death or serious injury.

4.1 General Transportation

To prepare the system for transportation:
1. Ensure the mast is fully nested. Do not transport the system with the mast extended.
Always visually confirm the mast is fully retracted before moving the vehicle.
2. Ensure the mast system is powered off and remove the supply voltage to the Mast
System to eliminate the possibility of inadvertent mast extension.
TP-5554501-B
May 2019
I
NSTRUCTIONS FOR
Transportation
Original Instructions
N S L & I
IGHT CAN ITE NFLEXION
HD
4-1