Table 1-2 Night Scan Lite With Rcp And Two X200 Led Lights - Will Burt NIGHT SCAN LITE Instructions Manual

Mobile lighting tower

Hide thumbs

Table Of Contents

Table of Contents

Functional Characteristic

Fully Extended Height to top of Lights

Fully Extended Height to top of Top Section

Fully Nested Height

(Can vary with saddle height adjustment)

Payload Weight Capacity (Includes RCP & Lights)

Payload Sail Area Capacity (Includes RCP & Lights)

Approximate Weight

(Includes HHRC and Junction Box)

Footprint

Mast Type

Emergency Operation

Frame Material

Mast Control Input Power

X200 Lights Input Power

Mast Control System Amp Draw Including Inrush

X200 Light Amp Draw including Inrush

Raw Lumen Output

(Total for Two Lights)

Light Pan Degrees of Rotation / Rotation Speed

Light Tilt Degrees of Rotation / Rotation Speed

Operating Temperature Range

Storage Temperature Range

Survival Wind Speed

(Payload Total Sail Area = 0.28 sq. m (3 sq. ft.); CD = 1.5)

Deployment Wind Speed Maximum

Maximum Deployment Angle

Maximum Altitude Above Sea Level

Approximate Mast Extension Time

Approximate Mast Retraction Time

Strobe Light Option

Camera Option

Airborn Noise Emissions

(measured according to EN ISO 3744:2010)

* Notes:



System weight varies based on the light package. Capacity includes a 125% NFPA Safety Factor.



The RCP + Qty(2) X200 LED lights represents 16.3 kg (36 lb.) and 0.09 sq. m (1 sq. ft.) sail area leaving

19.9 kg (44 lb.) and 0.19 sq. m (2 sq. ft.) for additional payload



Dimensions and specifications are provided for reference only and are not intended for vehicle design

purposes.



Specifications may be subject to change without notice.

TP-5554501-B

May 2019

NSTRUCTIONS FOR