Label Kit (English) (P/N: 5553501); Junction Box (P/N: 5549701) - Will Burt NIGHT SCAN LITE Instructions Manual

1.7.1.14 Label Kit (English) (P/N: 5553501)

The Label Kit is used to identify potential hazards and connection points within the Mast
System. These labels come installed on the Mast System. Additionally, an Operation Label
(P/N: 5555101) ships loose with the Mast System for Night Scan Lite. This label shall be applied
where the operator can view during operation. The Operation Label is required for NFPA1901
compliance.
Contact The Will-Burt Company for information pertaining to alternate language label kits.

1.7.2 Junction Box (P/N: 5549701)

The Junction Box (Figure 1-8):

Has Emergency Stop Switch, NFPA Start Button and Stop Button (if equipped) that
signal relays in the Control Box Assembly

Connects to the Control Box Assembly and the Hand-Held Remote Control

Weighs approximately 0.77 kg (1.7 lb.)
Hand Held
Remote Control
Connection Point
TP-5554501-B
May 2019
I
NSTRUCTIONS FOR
START BUTTON with
LED POWER
INDICATOR
STOP BUTTON
(if equipped)
Figure 1-8 Junction Box
Original Instructions
N S L & I
IGHT CAN ITE NFLEXION
EMERGENCY
STOP BUTTON
HD
1-17