I
N
NSTRUCTIONS FOR
IGHT
1.7.1.6 Support Struts
The Support Struts (Figure 1-4) provide lateral stability to the lift mechanism in all operating
positions.
1.7.1.7 Actuator (P/N: 5467502)
The Actuator (Figure 1-4):
Has integrated controls and driver
Includes internal extended and retracted limit switches
Is IP66 rated (dynamic) for dust and water ingress protection
Factory programed soft start and stop in both directions for smooth mechanism
operation at travel extremes
Nesting motion stops when Actuator hard stop is reached or current limiting (10 amp)
into nested bumpers.
Current limit protection for overload conditions
Has a safety nut in retraction direction to prevent Actuator collapse if the Actuator Screw
fails
1.7.1.8 Gas Springs (P/N: 5537701)
The Gas Springs (Figure 1-4) provide fall arrest in the unlikely event of collapse of the Top
Section.
1-14
S
L
& I
CAN
ITE
NFLEXION
Support
Struts
Figure 1-4 Support Struts, Actuator, and Gas Springs
Original Instructions
HD
Gas
Springs
Actuator
TP-5554501-B
May
2019