Shipping - Will Burt NIGHT SCAN LITE Instructions Manual

I N
NSTRUCTIONS FOR IGHT

4.2 Shipping

When shipping the system, The Will-Burt Company recommends shipping the mast in the
original shipping crate (P/N: 5567801). If the original shipping crate is not available, contact The
Will-Burt Company to order a replacement.
Safety Instruction – Observe Proper Procedures! Use extreme caution while lifting the Mast
System and when Mast System is suspended to avoid injury and equipment damage. Be certain
the Mast System is properly secured. All operators should be aware of and follow the applicable
local, regional, and national standards and codes of practice for slinging and transporting
equipment. Never lift Mast System over people. Ensure lifting equipment including, but not
limited to, lifting straps and hoist, are capable of handling the forces generated from lifting the
system. Observe manufacturer instructions on lifting equipment. Death or serious injury could
result if proper procedures are not followed.
When shipping:
1. As necessary, prepare the system for transportation (Section 4.1)
2. As necessary, uninstall the system from the mounting structure (Section 2).
3. Secure the system in the shipping crate. Bolt the mast down to the reinforcement 2x4's
provided. Also, apply a strap over the RCP or top tube to keep from bouncing upward
during shipment.
4-2
S L & I
CAN ITE NFLEXION
Original Instructions
HD
TP-5554501-B
May 2019