System Disposal - Will Burt Night Scan Chief Series Operating Instructions Manual

NIGHT SCAN CHIEF
OPERATING INSTRUCTIONS
8. Stow the mast, watching for the RCP and lights to become oriented as described in the begin-
ning of this section. If it does not look like the RCP is properly positioned during stowing, use
the Emergency Stop to stop motion and re-adjust the flags.
9. Once proper positioning is achieved, raise the mast high enough and replace the RCP cover.
Tilt Sensor Home
Approach this photo sensor from this direction
Pan Sensor Home
Approach this photo sensor from this direction
7.7

System Disposal

Dispose of the Mast in accordance with the national environmental regulations.
PAGE 50 OF 80
Figure 7-4 RCP PCB Photo Sensors
TP-4602001-T
DECEMBER 2020