I
N
NSTRUCTIONS FOR
IGHT
1.2.2 National Fire Protection Agency NFPA 1901:2016 Compliance
The mast system is designed to be compliant with the following sections of NPFA-1901 2016
Edition:
22.14 Powered Operated Light Masts
23.13 Power Operated Masts
To adhere to NFPA requirements, the installer shall do the following during installation:
1. Install the operator instruction/warning label (provided with the system) at the user
control station in view of the operator.
2. Install a safety interlock circuit (sensor provided with Mast System) for driver warning
when the mast is deployed.
1.3 Safety Precaution Notification
Refer to the Safety Summary for precautions to be observed while installing, operating, or
maintaining this equipment.
1.4 Manual Organization
This manual is organized into the following sections:
Section 1 Introduction
Section 2 Installation
Section 3 Operation
Section 4 Transportation
Section 5 Maintenance
Section 6 Troubleshooting
Section 7 Reference
1-4
S
L
& I
CAN
ITE
NFLEXION
Original Instructions
HD
TP-5554501-B
May
2019