Operate The Rcp And Lights; Operate The Auxiliary Devices - Will Burt NIGHT SCAN LITE Instructions Manual

I N
NSTRUCTIONS FOR IGHT

3.4.2.3 Operate the RCP and Lights

All RCP, AUX and Light functions are prohibited by the control until the mast has reached the
fully extended height. Attempts to pan and tilt the RCP while at an intermediate height are
prohibited by the control to protect the lights or payload from crashing into the vehicle while
deploying or retracting. The RCP and Lights will become active when the mast reaches the fully
extended (90°) position. The Look-Up Light will illuminate while the RCP and Lights are in
motion.
The RCP is a single-tilt RCP, meaning both banks of lights tilt up and down together. The left
and right light banks are toggle on and off independently. Alternative payloads for the Inflexion
HD can be used similarly on either or both light circuits.
To pan and tilt the lights:

Press and hold the Pan Right

Press and hold the Pan Left

Press and hold the Tilt Down

Press and hold the Tilt Up
Note: When the mast is initially extended, the:

RCP can only pan in one direction

Lights can only tilt down
There are two Light
the lights, press the Light
used for other payload applications for Inflexion HD (or the AUX circuits).

3.4.2.4 Operate the Auxiliary Devices

Depending on the Mast System configuration, there may be additional auxiliary devices such as
strobe lights or cameras. System power is disable to auxiliary devices until the mast has
reached the fully extended (90°) position.
To operate the auxiliary devices:

Press the AUX 1

Press the AUX 2
3-6
S L & I
CAN ITE NFLEXION
button to turn the lights to the right
button to turn the lights to the left
button to tilt the lights down
button to tilt the light up
buttons on the HHRC. Each on operates one bank of lights. To operate
buttons to toggle the light banks on and off. These can also be
button to toggle auxiliary 1 on and off
button to toggle auxiliary 2 on and off
Original Instructions
HD
TP-5554501-B
May 2019