X200 Lights (P/N: 5355406); Remote Controlled Positioner (Rcp) (P/N: 5532401); Figure 1-2 Remote Controlled Positioner With 4 X200 Led Lights - Will Burt NIGHT SCAN LITE Instructions Manual

I N
NSTRUCTIONS FOR IGHT

1.7.1.1 X200 Lights (P/N: 5355406)

The standard light options for the Night Scan Lite are:

(4) X200 LED Lights

(2) X200 LED Lights

No Lights
The X200 LED Lights (Figure 1-2) are:

IP69K rated

80,000 Raw Lumens (4 lights)

40,000 Raw Lumens (2 lights)
X200
Lights

Figure 1-2 Remote Controlled Positioner with 4 X200 LED Lights

1.7.1.2 Remote Controlled Positioner (RCP) (P/N: 5532401)

The RCP (Figure 1-2):

Mounts on top of the mast

Contains gears and gear motors to position the lights

Contains the RCP Board which receives data through the Base Board from the controller
which allows the RCP to pan and tilt the lights

Is single-tilt, meaning both sets of lights tilt together

Allows full 360° pan and tilt motion

Contains an active relay to force the RCP to stow upon deactivation

Includes a 1.8 meter cable (Section 1.7.1.3) which is routed through the Top and Base
Sections (Section 1.7.1.4) and around the Knuckle (Section 1.7.1.5)
1-12
S L & I
CAN ITE NFLEXION
RCP
Original Instructions
HD
TP-5554501-B
May 2019