5. Software Control - Lightware Device Controller
5.10.3. Front Panel
Front panel tab in Settings menu
Front panel operation LEDs and buttons can be configure in this tab.
▪
You can disable the functionality of the front panel buttons with marking the Lock front panel option.
This is same method of the control lock made by the front panel buttons. See the details in the
Lock
section.
#controllock #buttonlock #lockbutton
▪
Dark mode enable/disable: video and audio LEDs on the front panel are turned off 60 seconds after
enabling the dark mode.
#darkmode
Enable default function for Video Select/ Audio Select/ Function (Show me) button: when this property is
▪
disabled, it means that pushing the button will not perform the original function. This makes the
button free for programming custom function by the
LW3 protocol, for more details see
Event
Manager. This setting is also available via
Disable the Default Function of the Front Panel Buttons
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
UMX-HDMI-140 series– User's Manual
5.10.4. System
Three functions are available under System tab:
▪
Download system log - saving the file of the device.
▪
Load factory defaults - recalling factory defaults settings and values. All factory default settings are
Control
listed in the
▪
Reboot - rebooting the system.
section.
System tab in Settings menu
#log #systemlog
Factory Default Settings
section.
#factory
#reset #reboot #restart
53