Mounting Options; High Rack Shelf; Under-Desk Double Mounting Kit; Electrical Connections - Lightware UMX-HDMI-140 Series User Manual


  
3. Installation
3.1. Mounting Options
To mount the switcher Lightware supplies optional accessories for different usage. There are two kinds of
mounting kits with similar fixing method. The switcher has two mounting holes with inner thread on the
bottom side; see the bottom view in the
enclosed to the accessory:

Under-desk double mounting kit

The Under-desk double mounting kit makes easy to mount a single device on any flat surface, e.g. furniture.
1U high rack shelf provides mounting holes for fastening two half-rack or four quarter-rack sized units.
Pocket-sized devices can also be fastened on the shelf. To order mounting accessories please contact
sales@lightware.com.

WARNING! Always use the supplied screws. Using different (e.g. longer) ones may cause damage to the
device.

INFO: The switcher is half-rack sized.
3.1.1. 1U High Rack Shelf
Allows rack mounting for half-rack, quarter-rack and pocket sized units.
1U high rack shelf provides mounting holes for fastening two half-rack or four quarter-rack sized units.
Pocket sized devices can also be fastened on the self.
Mechanical Drawings section. Fasten the device by the screws
1U high rack shelf
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
UMX-HDMI-140 series– User's Manual
3.1.2. Under-desk Double Mounting Kit
The UD-kit double makes it easy to mount a single switcher on any flat surface (e.g. furniture).

INFO: The chipboard screws are not supplied with the mounting kit.
3.2. Electrical Connections
3.2.1. 12V DC Connection
Do not forget to turn the plug clockwise direction before disconnecting the power adaptor.

WARNING! Always use the supplied 12V power adaptor. Warranty void if damage occurs due to use of a
different power source.
Locking DC connector
19