Query The Audio Autoselect Settings; Change The Autoselect Mode; Query The Input Port Priority - Lightware UMX-HDMI-140 Series User Manual


  
7. LW3 Programmers' Reference
7.6.5. Query the Audio Autoselect Settings
Command and Response #autoselect
ç GET·/MEDIA/AUDIO/XP.DestinationPortAutoselect
pr·/MEDIA/AUDIO/XP.DestinationPortAutoselect=<out_set>
æ
The response shows the settings of each output one by one.
Parameters
Parameter Parameter description
Two-letter code of the
Autoselect settings
1 letter
st
<out_set>
Two-letter code of the
Autoselect settings
2 letter
nd
Example
ç GET /MEDIA/AUDIO/XP.DestinationPortAutoselect
æ pr /MEDIA/AUDIO/XP.DestinationPortAutoselect=EL
Explanation
EL: the Autoselect is Enabled on O1, selected mode is Last detect.
INFO: For more information see The Autoselect Feature
Value Explanation
E Autoselect is enabled.
D Autoselect is disabled.
First detect mode: the first active audio
F
input is selected.
Priority detect: always the highest priority
P
active video input will be selected.
Last detect: always the last attached input
L
is switched to the output automatically.
Static: the audio input follows the selected
S video if the video signal contains
embedded audio.
section.
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
UMX-HDMI-140 series– User's Manual
7.6.6. Change the Autoselect Mode
Command and Response
ç CALL·/MEDIA/AUDIO/XP:setDestinationPortAutoselect(<out>:<out_set>)
æ mO·/MEDIA/AUDIO/XP:setDestinationPortAutoselect
Legend
See the previous section.
Example
ç CALL /MEDIA/AUDIO/XP:setDestinationPortAutoselect(O1:EF)
æ mO /MEDIA/AUDIO/XP:setDestinationPortAutoselect
Explanation
The Autoselect mode is Enabled on Output 1 in First detect mode.
7.6.7. Query the Input Port Priority
Command and Response
ç GET·/MEDIA/AUDIO/XP.PortPriorityList
pr·/MEDIA/AUDIO/XP.PortPrioirtyList=<in1_prio>
æ
Legend
<out_prio>: The input port priority order of the given output port: I1 to I5.
Example
ç GET /MEDIA/AUDIO/XP.PortPriorityList
æ pr /MEDIA/AUDIO/XP.PortPriorityList=0,1,2,3,4
Explanation
The Input 1 has the highest priority and Input 5 has the lowest priority on O1 output port.
ATTENTION! The same priority number can be set to different input ports. When the priority numbers
match, the input port with the lowest port number will have the highest priority.
85