Test Pattern - Lightware UMX-HDMI-140 Series User Manual


  
5. Software Control - Lightware Device Controller
5.6.2. Test Pattern
The port generates an image which can be displayed when there is no incoming signal on the port. Each port
can have individual settings which can be set by clicking on the Configure button.
Port properties window of the Test pattern input
UMX-HDMI-140 series– User's Manual
Test Pattern Configuration on Testpattern Port (I6)
#testpattern #nosyncscreen
Test Pattern Configuration on Video Input Ports
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
Resolution: Set the desired image resolution from the drop-
down menu.
Color: Click on the desired color or use the sliders and
press the Set color button to store.
Mode: Auto: No sync screen signal is sent when
there is no incoming signal.
Always on: No sync screen signal is sent always,
independently from the incoming
signal.
Always off: No signal is sent when there is no
incoming signal.
Resolution: Set the desired image resolution from the drop-
down menu.
Color: Click on the desired color or use the sliders and
press the Set color button to store.
41