Release Notes Of The Firmware Packages - Lightware UMX-HDMI-140 Series User Manual


  
11. Appendix
11.9. Release Notes of the Firmware Packages
v1.2.0b12
Release date: 2019-04-05
New feature:
▪ Sending IR codes (SendProntoHex e.g. send max. 200 Byte IR code with Event Actions) for UMX-HDMI-
140-Plus only!
▪ CEC - sendCEC command (e.g. turn on the TV with Event Actions) for UMX-HDMI-140-Plus only!
▪ RS232 Minimal Recognizer for Cisco compatibility (Cisco Login) for UMX-HDMI-140-Plus only!
Bugfix:
▪ Condition link was broken is fixed.
▪ Notification message fixed - Use LDU2 v1.2.3 for the upgrade!
v1.1.1b8
Release date: 2019-01-14
New feature:
▪ Factory default values changed (Autoselect: enabled; Autoselect mode: Last detect)
▪ 40 event can be saved in Event Manager
▪ Added 'User replaceable miniweb slot' to support built-in control webpage
▪ Firmware platform library updated
▪ Added 'Dark mode' function to turn off front panel LEDs
▪ Compatible for LDU2 only!
▪ Improved GPIO detection
▪ Modified DP input driver to fix HDCP issue with MacBooks
▪ Added 'Disable default button function' option to support button customizetion in Event Manager
▪ Modified RS-232 modes to support SendMessage in Control mode
▪ Added 'Forced button lock' function to lock buttons via protocol command
Bugfix:
▪ Message sending via an RS-232 Port is available in all RS-232 modes (Control mode/ Command
injection mode / Event manager mode).
▪ Fixed DP input cable adaptor detection.
Known issue:
▪ GPIO input polling time is slow, in spite of the correct operation, it may seem that the connected buttons
are not sensed
UMX-HDMI-140 series– User's Manual
v1.0.5b4
Release date: 2018-06-25
New feature:
▪ Factory default values changed (Autoselect: enabled; Autoselect mode: Last detect)
▪ 40 event can be saved in Event Manager
Bugfix:
▪ Message sending via an RS-232 Port is available in all RS-232 modes (Control mode/ Command
injection mode / Event manager mode).
Known issue:
▪ GPIO input polling time is slow, in spite of the correct operation, it may seem that the connected buttons
are not sensed
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
123