Lock The Front Panel Buttons; Disable The Default Function Of The Front Panel Buttons; Identify The Device; Dark Mode - Lightware UMX-HDMI-140 Series User Manual


  
7. LW3 Programmers' Reference
7.4.7. Lock the Front Panel Buttons
Command and Response #controllock #buttonlock #lockbutton
ç SET /MANAGEMENT/UI.ControlLock=<lock_status>
æ pw /MANAGEMENT/UI.ControlLock=<lock_status>
Parameters
Parameter Parameter description
<lock_status> Locking status
Example
ç SET /MANAGEMENT/UI.ControlLock=1
æ pw /MANAGEMENT/UI.ControlLock=1
7.4.8. Disable the Default Function of the Front Panel Buttons
This setting makes possible to set an event with Event Manager where the Condition is pressing a button
and the original function of the chosen button will not be executed.
Command and Response
ç SET /MANAGEMENT/UI/BUTTONS/<button_id>.DefaultFunctionEnable=<button_status>
æ pw /MANAGEMENT/UI/BUTTONS/<button_id>.DefaultFunctionEnable=<button_status>
Parameters
Parameter Parameter description
<button_id> Locking status
<button_status>
Example
ç SET /MANAGEMENT/UI/BUTTONS/B1.DefaultFunctionEnable=false
æ pw /MANAGEMENT/UI/BUTTONS/B1.DefaultFunctionEnable=false
Value Explanation
None - All functions of the front panel button are
0
enabled.
Locked - The front panel buttons are locked and
they can be unlock by pressing Audio select and
1
Show Me buttons together or with LW3 protocol
command.
Force locked - Locking and unlocking of the front
2 panel buttons are possible only via protocol
command.
Value Explanation
B1 Video Select button
B2 Audio Select button
B3 Show Me button
true Enabled
false Disabled
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
UMX-HDMI-140 series– User's Manual
7.4.9. Identify the Device
Calling the method results the blinking of the status LEDs for 10 seconds. The feature helps to identify the
device itself in the rack shelf.
Command and Response #identifyme
ç CALL·/MANAGEMENT/UI:identifyMe()
æ mO·/MANAGEMENT/UI:identifyMe=
Example
ç CALL /MANAGEMENT/UI:identifyMe()
æ mO /MANAGEMENT/UI:identifyMe
7.4.10. Dark Mode
This command turns the video and audio LEDs off the on the front panel.
Command and Response #darkmode
ç SET /MANAGEMENT/UI/DARKMODE.DarkModeEnable=<darkmode_status>
æ pw /MANAGEMENT/UI/DARKMODE.DarkModeEnable=<darkmode_status>
Parameters
Parameter Parameter description
<logical_value> Status of the dark mode
Example
ç SET /MANAGEMENT/UI/DARKMODE.DarkModeEnable=true
æ pw /MANAGEMENT/UI/DARKMODE.DarkModeEnable=true
7.4.11. Dark Mode Delay
The LEDs on the front panel turn off after some delay time, which can be set in seconds.
Command and Response
ç SET /MANAGEMENT/UI/DARKMODE.DarkModeDelay=<delay_time>
æ pw /MANAGEMENT/UI/DARKMODE.DarkModeDelay
Parameters
<delay_time> Delay time in seconds.
Example
ç SET /MANAGEMENT/UI/DARKMODE.DarkModeDelay=10
æ pw /MANAGEMENT/UI/DARKMODE.DarkModeDelay=10
Value Explanation
true Dark mode is enabled.
false Dark mode is disabled.
=<delay_time>
77