Input/Output Port Numbering; Mechanical Drawings - Lightware UMX-HDMI-140 Series User Manual


  
11. Appendix
11.3. Input/Output Port Numbering
The following table contains the input and output ports with their ID numbers which shall be used in protocol
commands.
Audio/Video Ports
Video port number
Port name
LW2
Analog audio in 1 -
VGA in 01
HDMI in 02
DP in 03
DVI-D in 04
DVI-A in 05
Analog audio in 2 -
HDMI out 01
Infrared Ports
Port name Port nr. (LW3)
IR input S1
IR output D1
11.4. Mechanical Drawings
The following drawings present the physical dimensions of the device. Dimensions are in mm.
Bottom View
M3 thread
Audio port number
Emulated EDID memory
LW3 LW2 LW3
- 01 I1
I1 - -
I2 02 I2
I3 03 I3
I4 04 I4
I5 - -
- 05 I5
O1 01 O1
178.5 20
M3 thread
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
UMX-HDMI-140 series– User's Manual
Front View
Top View
-
E1
E2
Universal Switcher
with VGA, HDMI, DP, DVI-I
and Analog Audio inputs
E3
E4
E5
VIDEO SELECT:
-
AUDIO SELECT:
-
Rear View
PIN: 2.1mm
12V 1A DC
Side View
VGA
HDMI
DP
DVI-D
VIDEO
VGA IN AUDIO1 IN 2 HDMI IN 3 DP IN INPUT STATUS
221
Front LEDs
LIVE LED
OFF: No power
Blinking (1 sec): Normal operation
Fast blinking (0.5 sec): Firmware upgrade mode
ON: Powered but no operation
INPUT STATUS LEDs
VGA HDMI DP DVI-D OFF: Input is not selected
Blinking: Selected input has no signal
Autoselect DVI-A
ON: Input is selected and signal is present
Rear LEDs
Audio1 HDMI emb. DP emb.
HDMI OUT - SIGNAL LED
Audio2 DVI-D emb.
ON: Signal is present on output
HDMI OUT - HDCP LED
OFF: Output signal is not HDCP encrypted
Blinking: Non HDCP capable device is connected,
encrypted signal cannot be transmitted
ON: Output signal is HDCP enrcyped
SIGNAL HDCP
RS-232 GPIO
TX RX 1 2 3 4 5 6 7 LAN IR IN IR OUT HDMI OUT
119
Audio1 LIVE RESET
HDMI Autoselect
DP DVI-A Video
DVI-D Audio2
AUDIO
VIDEO AUDIO SHOW
SELECT SELECT ME
UMX-HDMI-140
Port legend
Video only
Audio only
2 Video with embedded audio
Sn: RoHS
Made in EU, Hungary
5 AUDIO2 IN
L R 4 5 DVI-I IN