Hashtag Keyword List - Lightware UMX-HDMI-140 Series User Manual


  
11. Appendix
11.10. Hashtag Keyword List
This user's manual contains keywords with hashtag (#) to help you to find the relevant information as quick
as possible.
The format of the keywords is the following:
The usage of the keywords: use the Search function (Ctrl+F / Cmd+F) of your PDF reader application, type the
# (hashtag) character and the wished keyword.
The #new special keyword indicates a new feature/function that has just appeared in the latest firmware or
software version.
Example
#dhcp
This keyword is placed at the DHCP (dynamic IP address) setting in the front panel operation, the Lightware
Device Controller (LDC) and the LW3 programmer's reference section.
The following list contains all hashtag keywords placed in the document with a short description belonging
to them. The list is in alphabetical order by the hashtag keywords.
Hashtag Keyword 
#advancedview Advanced view / Terminal window
#analogaudio Analog audio related settings
#analogvideo Analog video related settings
#autoselect Autoselect feature settings
#backup Configuration cloning (backup)
#balance Balance (for analog audio) setting
#bootload Bootload mode setting
#builtinweb Built-in miniweb
#buttonlock Front panel button lock setting
#cec CEC related settings
#colorspace Color space converter related settings
#commandinjection RS-232 command injection settings
#configurationcloning Configuration cloning (backup)
#controllock Control lock setting
#crosspoint Crosspoint switch setting
#darkmode Dark mode setting
#devicelabel Device label
#<keyword>
Description
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
UMX-HDMI-140 series– User's Manual
Hashtag Keyword 
#dhcp
#diagnostic
#edid
#ethernet
#eventmanager
#factory
#firmwareversion
#framedetector
#gpio
#hdcp
#identifyme
#infra
#infrared
#ipaddress
#ir
#label
#lock
#lockbutton
#log
#message
#miniweb
#mute
#network
#nosyncscreen
#portstatus
#power5v
#producttype
#protocol
#reboot
#recognizer
#reset
Description
Dynamic IP address (DHCP) setting
Failure diagnostic related tool/information
EDID related settings
Ethernet related settings
Event manager
Factory default settings
Firmware version query
Frame detector in LDC
GPIO related settings
HDCP-encryption related setting
Identify me (identify the device) feature
Infrared port related settings
Infrared port related settings
IP address related settings
Infrared port related settings
Device label
Port lock setting
Front panel button lock setting
System log
Message sending via communication ports
Built-in miniweb
Port mute setting
Network (IP address) related settings
Test pattern (no sync screen) settings
Source/destination port status query
Power 5V mode setting
Product type query
RS-232 protocol setting
Restarting the device
RS-232 recognizer related settings
Restarting the device
124