Lightware UMX-HDMI-140 Series User Manual page 11


  
1. Introduction UMX-HDMI-140 series– User's Manual 11
Video Conference Room
The Concept
The VC (Video Conference) room has an HD Display, Active speakers, and Video conference codec. The
UMX-HDMI-140 switcher is assembled under the desk in an Under-desk Double Mounting Kit. The cables for
the input sources are guided below the desk's surface to a cable box. The visitors of the huddle room can
use their laptops built with VGA, HDMI, DVI, DisplayPort, or Thunderbolt connectors as well. The device also
accepts analog audio signals from two different sources. You can see all accepted interfaces of the device
in the Electrical Connections section.
The number of the inputs of the Video conference codec is extended by the Switcher as its output is
connected to the input of the VC. The Switcher can be controlled easily via LAN network using our controller
software (LDC); see the details in the Software Control - Lightware Device Controller chapter.
The HDMI cable between the Switcher and the codec can be up to 20 meters thanks to the built-in Pixel
Accurate Reclocking technology of the device.
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7