Settings Menu; Status; Network - Lightware UMX-HDMI-140 Series User Manual


  
5. Software Control - Lightware Device Controller
5.10. Settings Menu
5.10.1. Status
The most important hardware and software related information can be found on this tab: hardware and
firmware version, serial numbers, temperatures, operation time, and voltage information. Device label can be
changed to unique description by the Set button.
#serialnumber #miniweb #builtinweb #web
Please note that the Miniweb-related descriptions can be found in
Identify Me Feature
Clicking on the Identify me button results the blinking of the status (in green) for 10 seconds. The feature
helps to identify the device itself in the rack shelf.
Status tab in Settings menu
#label #devicelabel #status #firmwareversion #producttype
The Built-in Miniweb section.
#identifyme
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
UMX-HDMI-140 series– User's Manual
5.10.2. Network
IP address and DHCP settings can be set on this tab. Always press the Apply settings button to save changes.
Factory defaults settings can be recalled with a dedicated button.
Network tab in Settings menu
#ipaddress #network #dhcp
52