Crosspoint Menu - Lightware UMX-HDMI-140 Series User Manual


  
5. Software Control - Lightware Device Controller
5.4. Crosspoint Menu
When LDC finds the hardware, it determines the product type, and the LDC starts with the default page,
showing the Crosspoint menu. #crosspoint #switch
2
3
4
UMX-HDMI-140 series– User's Manual
1
7
6
5
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
1 Main menu The available menu items are displayed. The active one is showed with dark
grey background color.
Information The label shows the device label which can be edited in the Settings menu -
2
ribbon tab. Device discovery window can be displayed by clicking on this ribbon.
3 Video input Each tile represents a video input port. The tile below the port shows the current
ports crosspoint setting; if the port is switched to the output, the color of the tile is
white, otherwise grey.
Audio input Each tile represents an audio input port. The tile below the port shows current
4
ports crosspoint setting; if the port is switched to the output, the color of the tile is
white, otherwise grey. Dark grey means the audio port is not allowed to embed
in the current video input port.
5 Advanced view Displaying Advanced View
protocol tree.
Audio output The audio output of the HDMI out port. Clicking on the tile opens the
6
Properties Windows.
7 Video output The video output of the HDMI out port. Clicking on the tile opens the
Properties Windows.
Status
Window, showing the Terminal window and the LW3
Port
Port
34