Lightware UMX-HDMI-140 Series User Manual page 12


  
1. Introduction UMX-HDMI-140 series– User's Manual 12
Collaboration Room with Ceiling Mounted Projector
The Concept
The Collaboration Room is built with a ceiling mounted projector and a projection screen. The output of
UMX-HDMI-140 is connected to the projector by HDMI cable which can be extended up to 40 meters using
a Lightware HDMI-Extender device. The HDMI-Extender does not need local powering because it can be
supplied via the HDMI cable.
The Switcher can be controlled easily via LAN network using our controller software (LDC); see the details in
the Software Control - Lightware Device Controller chapter.
As an additional feature the Switcher can control the projection screen indirectly. Connect a relay box to
the GPIO port of the UMX-HDMI-140 which can roll up and down the projection screen. You can find more
information about it in the GPIO Interface section.
To order Lightware HDMI-Extender device please contact sales@lightware.com.
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7