Ip Address Query; Ip Address Setting; Subnet Mask Query; Subnet Mask Setting - Lightware UMX-HDMI-140 Series User Manual


  
6. LW2 Programmer's Reference
6.5.2. IP Address Query
IP address can be queried as follows.
Command and Response
ȩ {IP_ADDRESS=?}
Ȩ (IP_ADDRESS=<mode>;<ip_address>)CrLf
Parameters
Parameter Parameter description
Static IP address setting or
<mode>
DHCP (dynamic IP address)
Current IP address of the
<ip_address>
device
Example
ȩ {ip_address=?}
Ȩ (IP_ADDRESS=1;192.168.2.118)
Explanation
The device has a DHCP (dynamic) IP address: 192.168.2.118.
6.5.3. IP Address Setting
IP address can be set as follows.
Command and Response
ȩ {IP_ADDRESS=<mode>;<ip_address>}
Ȩ (IP_ADDRESS=<mode>;<ip_address>)CrLf
Parameters
Parameter Parameter description
Static IP address setting or
<mode>
DHCP (dynamic IP address)
<ip_address> IP address of the device
Example
ȩ {ip_address=1;}
Ȩ (IP_ADDRESS=1;192.168.2.118)
Explanation
The device is set to DHCP (dynamic) IP address and got 192.168.2.118.
UMX-HDMI-140 series– User's Manual
Value Parameter value
0 Static IP address
1 DHCP
IP address (four decimal octets
separated by dots).
Value Parameter value
0 Static IP address
1 DHCP
IP address (four decimal octets
separated by dots).
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
6.5.4. Subnet Mask Query
IP address can be queried as follows.
Command and Response
ȩ {IP_NETMASK=?}
Ȩ (IP_NETMASK=<subnet_mask>)CrLf
Parameters
Parameter Parameter description
Current subnet mask of the
<subnet_mask>
device
Example
ȩ {ip_netmask=?}
Ȩ (IP_NETMASK=255.255.255.0)
6.5.5. Subnet Mask Setting
IP address can be set as follows.
Command and Response
ȩ {IP_NETMASK=<subnet_mask>}
Ȩ (IP_NETMASK=<subnet_mask>)CrLf
Parameters
Parameter Parameter description
<subnet_mask> Subnet mask of the device
Example
ȩ {ip_netmask=255.255.0.0}
Ȩ (IP_NETMASK=255.255.0.0)
66
Value Parameter value
Subnet mask (four decimal octets
separated by dots).
Value Parameter value
Subnet mask (four decimal octets
separated by dots).