Lightware UMX-HDMI-140 Series User Manual page 71


  
6. LW2 Programmer's Reference
Network Configuration
IP Status Query
ȩ {IP_STAT=?}
IP Address Query
ȩ {IP_ADDRESS=?}
IP Address Setting
ȩ {IP_ADDRESS=<mode>;<ip_address>}
Subnet Mask Query
ȩ {IP_NETMASK=?}
Subnet Mask Setting
ȩ {IP_NETMASK=<subnet_mask>}
Gateway Address Query
ȩ {IP_GATEWAY=?}
Gateway Mask Setting
ȩ {IP_GATEWAY=<gateway_address>}
Apply Network Settings
ȩ {IP_APPLY}
RS-232 Settings
RS-232 Mode Setting
ȩ {RS232=<mode>}
RS-232 Parameters Settings
ȩ {RS232_LOCAL_FORMAT=<BaudRate>;<DataBit>;<Parity>;<StopBit>}
RS-232 Control Protocol Port Setting
ȩ {RS232_LOCAL_PROT=<protocol>}
GPIO Configuration
Query the Level and Direction for Each Pins
ȩ {GPIO<pin_number>=?}
Setting of Level and Direction for Each Pins
ȩ {GPIO<pin_number>=<direction>;<level>}
UMX-HDMI-140 series– User's Manual
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
71