Troubleshooting - Lightware UMX-HDMI-140 Series User Manual


  

9. Troubleshooting

9
T roubleshooting
Usually, if the system seems not to transport the signal as expected, the best strategy for troubleshooting is to
check signal integrity through the whole signal chain starting from source side and moving forward to switcher end.
Link to connections/cabling section.
Link to front panel operation section.
Link to LDC software section.
LW2 Link to LW2 protocol commands section.
LW3 Link to LW3 protocol commands section.
The following sections are available in the chapter:
Use Case Studies
Î
How to Speed Up the Troubleshooting Process
Î
UMX-HDMI-140 series– User's Manual
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
108