7. LW3 Programmers' Reference
7.15.2. Set the Output Level of a GPIO Pin
Command and Response
SET·/MEDIA/GPIO/<GPIO_port>.Output=<level>
ç
pw·/MEDIA/GPIO/<GPIO_port>.Output=<level>
æ
Parameters
Parameter
Parameter description
<GPIO_port>
GPIO pin number
<level>
Level of the pin
Example
ç SET /MEDIA/GPIO/P1.Output=H
æ pw /MEDIA/GPIO/P1.Output=H
7.15.3. Toggle the Level of a GPIO Pin
It toggles between the high and low level of the chosen output port.
Command and Response
ç CALL·/MEDIA/GPIO/<GPIO_port>:toggle()
æ pw·/MEDIA/GPIO/<GPIO_port>:toggle
Example
ç CALL /MEDIA/GPIO/P1:toggle()
æ mO /MEDIA/GPIO/P1:toggle
UMX-HDMI-140 series– User's Manual
Value
Parameter value
0 ...8
GPIO pin number 1 to 8
L
Low
H
High
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
99