Databits Setting; Stopbits Setting; Parity Setting; Command Injection Mode - Lightware UMX-HDMI-140 Series User Manual


  
7. LW3 Programmers' Reference
7.9.4. Databits Setting
Command and Response
SET·/MEDIA/UART/P1.DataBits=<databits>
ç
pw·/MEDIA/UART/P1.DataBits=<databits>
æ
Parameters
Parameter Parameter description
<databits> Databits value
Example
ç SET /MEDIA/UART/P1.DataBits=8
æ pw /MEDIA/UART/P1.DataBits=8
7.9.5. Stopbits Setting
Command and Response
SET·/MEDIA/UART/P1.StopBits=<stopbits>
ç
pw·/MEDIA/UART/P1.StopBits=<stopbits>
æ
Parameters
Parameter Parameter description
<stopbits> Stopbits value
Example
ç SET /MEDIA/UART/P1.StopBits=0
æ pw /MEDIA/UART/P1.StopBits=0
Value Parameter value
8 8
9 9
Value Parameter value
0 1
1 1,5
2 2
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
UMX-HDMI-140 series– User's Manual
7.9.6. Parity Setting
Command and Response
SET·/MEDIA/UART/P1.Parity=<parity>
ç
pw·/MEDIA/UART/P1.Parity=<parity>
æ
Parameters
Parameter Parameter description
<parity>
Example
ç SET /MEDIA/UART/P1.Parity=0
æ pw /MEDIA/UART/P1.Parity=0
7.9.7. Command Injection Mode
Command and Response #commandinjection
SET·/MEDIA/UART/P1.CommandInjectionEnable=<logical_value>
ç
pw·/MEDIA/UART/P1.CommandInjectionEnable=<logical_value>
æ
Parameters
Parameter Parameter description

Command injection mode

<logical_value>
Example
ç SET /MEDIA/UART/P1.CommandInjectionEnable=true
æ pw /MEDIA/UART/P1.CommandInjectionEnable=true

INFO: The Command
/MEDIA/UART/P1.CommandInjectionStatus.
Value
0 None

Parity setting

1 Odd
2 Even
Value
true Command injection mode is enabled.
status
false Command injection mode is disabled.
injection status is stored in another
90
Parameter value
Parameter value
read-only property: