Lock Audio Output; Unlock Audio Output; Analog Audio Input Level Settings; Volume - Lightware UMX-HDMI-140 Series User Manual


  
7. LW3 Programmers' Reference
7.6.15. Lock Audio Output
Command and Response #lock
ç CALL·/MEDIA/AUDIO/XP:lockDestination(<out>)
æ mO·/MEDIA/AUDIO/XP:lockDestination
Example
ç CALL /MEDIA/AUDIO/XP:muteDestination(O1)
æ mO /MEDIA/AUDIO/XP:muteDestination
7.6.16. Unlock Audio Output
Command and Response #unlock
ç CALL·/MEDIA/AUDIO/XP:unlockDestination(<out>)
æ mO·/MEDIA/AUDIO/XP:unlockDestination
Example
ç CALL /MEDIA/AUDIO/XP:unmuteDestination(O1)
æ mO /MEDIA/AUDIO/XP:unmuteDestination
7.7. Analog Audio Input Level Settings
7.7.1. Volume
Command and Response
SET·/MEDIA/AUDIO/<in>.Volume=<level>
ç
pw·/MEDIA/AUDIO/<in>.Volume=<level>
æ
Parameters
<level> Sets the output volume (attenuation) between -95.625 dB and 0 dB in step of -0.375 dB. The
value is rounded up if necessary to match with the step value.
Example
ç SET /MEDIA/AUDIO/I1.Volume=-15
æ pw /MEDIA/AUDIO/I1.Volume=-15.000
#analogaudio #volume #balance
UMX-HDMI-140 series– User's Manual
7.7.2. Balance
Command and Response
SET·/MEDIA/AUDIO/<in>.Balance=<level>
ç
pw·/MEDIA/AUDIO/<in>.Balance=<level>
æ
Parameters
<level>
Example
ç SET /MEDIA/AUDIO/I5.Balance=75
æ pw /MEDIA/AUDIO/I5.Balance=75
The balance level of the right audio sink is set to 75%, the left one is set to 25%.
7.8. Network Configuration
7.8.1. Query the DHCP State
Command and Response
ç GET·/MANAGEMENT/NETWORK.DhcpEnabled
pw·/MANAGEMENT/NETWORK.DhcpEnabled=<logical_value>
æ
Parameters
Parameter
<logical_value>
Example
ç GET /MANAGEMENT/NETWORK.DhcpEnabled
æ pw /MANAGEMENT/NETWORK.DhcpEnabled=true
Applied firmware package: v1.2.0 | LDC software: v2.4.1b7
Sets the balance; 0 means left balance, 100 means right balance, step is 1. Center is 50
(default).
#network #ipaddress #dhcp
Parameter description Value
true
DHCP (dynamic IP
address) setting
false
87
Parameter value
Dynamic IP address is set.
Fix IP address is set.