Isdn Service Standards Supported; Operating System Requirements; Connectivity Requirements - Comtrol InterChange VS 3000 Series Installation And Configuration Manual

Introduction

ISDN Service Standards Supported

The VS3000U is designed for North American use and is compatible
with most ISDN service standards, including:
• AT&T, National ISDN-1 (NI-1), 5ESS Custom, and EuroISDN
• Nortel, NI-1, DMS-100 Proprietary (NTI), and EuroISDN
• Siemens, NI-1, and EuroISDN
The VS3000S is designed for international use, or North American use
when connected to an NT1 terminating unit, and is compatible with
most international ISDN service standards, including:
• European EuroISDN (ETSI NET-3)
• AT&T, National ISDN-1 (NI-1), 5ESS Custom, and EuroISDN
• Nortel, NI-1, DMS-100 Proprietary (NTI), and EuroISDN
• Siemens, NI-1, and EuroISDN

Operating System Requirements

The InterChangeVS 3000 requires at least one network server*
running one of the following operating systems:
• Windows NT (3.51 or 4.0) with Remote Access Service (RAS or
RRAS).
Note: The Windows NT 4.0 operating system is required to
support Multilink PPP.
®
• Citrix WinFrame
• Novell NetWare (3.12, 4.11, or IntranetWare
Note: Contact Novell Inc. for information regarding Multilink
PPP support for NetWare.
* Two or more network servers are required in order to use the
automatic backup server feature.

Connectivity Requirements

• One to four ISDN BRI telephone lines. (See Working With The
Phone Company, elsewhere in this guide.)
• An Ethernet connection, either directly to a NIC card in the host
server or to an Ethernet hub. (See Installing the Hardware,
elsewhere in this guide.)
8
®
(1.7 or later)
™
)
Product Overview